Chain Drive
      Back to home
      1. Help Desk
      2. TECHNICAL WORK INSTRUCTIONS
      3. Chain Drive

      FIT CHAIN GUARD

      This tutorial shows how to fit the chain guard from the XE-1

      1. Fit Chain Guard

      ID

      Description

      Task
       

      2.5 mm Hex Drive / Alan Key

      Loosen 8 Gauge Machine Screws

       

       

       

       

      1.1 Fit the transparent acrylic Chain Guard over the RH Pedal and Crank and onto the RH Rear Buoyancy.

      1.1 FIT CHAIN GUARD OVER RH PEDAL AND CRANK

      1.2 Align the Chain Guard with the recess on the RH Rear Buoyancy with screw holes aligned. Fit five 8-Gauge Machine Screws and fasten lightly. [Tools: 2.5 mm Hex Drive]

      1.2 FIT SCREWS

      INFO

      INFORMATION:  If the machine screws are over tightened, they will slip in the insert without causing serious damage. To maximize the life of the Buoyancy Inserts, avoid over tightening and subsequent wear of the inserts.