This tutorial shows how to fit the mini tiller onto the front tiller assembly of the XE-1.
TOOLS REQUIRED
| ID | Description | Task |
| M4 Hex Key | M5 Cap Screw – Mini Tiller to Pivot |
1. Work Instruction - Remove Steering Fork Assembly with bearings
1.1 Push-fit the Mini Tiller Bush to the Mini Tiller Strut if it is not fitted.
1.2 Place the M5 Nylock nut into the hex pocket of the Front Tiller Pivot.
|
|
INFORMATION:
Ensure that the Mini Tiller Strut is centred in relation to the Mini Tiller Bush. |
1.3 Align the Mini Tiller Assembly with the Front Tiller Pivot so that the holes align.
1.4 Fit the M5 x stainless steel screw through the bush to engage with the M5 Nylock nut.
|
|
INFORMATION:
It may be necessary to apply pressure to the captive Nylock nut when fastening the screw to prevent it from being dislodged as the screw if inserted. |
1.5 Fasten the M5 screw attaching the Mini Tiller Assembly to the Front Tiller Pivot to a torque value of 3 Nm with a M4 Hex Key.
