Body Parts
      Back to home
      1. Help Desk
      2. TECHNICAL WORK INSTRUCTIONS
      3. Body Parts

      FIT REAR RH BUOYANCY (Cranks Fitted)

      This tutorial shows how to fit the Rear Buoyancy Module into the XE-1

      1. Fit Rear RH Buoyancy (Cranks Fitted)

      TOOLS REQUIRED

      ID Description Task
        Long Nose Pliers Fit Buoyancy Clips


      1.1 With the Crank approximately in the 6 O’clock position, position the Rear RH Buoyancy Module by sliding it over the top of the RH Pedal and Crank.

      WI0091_1.1

      INFO

      INFORMATION: If the RH Cranks is fitted, the Chain Guard must be removed before fitting the Rear RH Buoyancy to the bike.


      1.2 Align the Rear RH Buoyancy with the Frame and LH Buoyancy so that the Insert Locating Pins align with the mating inserts on the RH Buoyancy module.


      WI0091_1.2

      1.3 Fit all seven Buoyancy Clips to secure both LH and RH Buoyancy halves to the hydrofoiler. [Tools: Long Nose Pliers]

      WI0091_1.3