Battery
      Back to home
      1. Help Desk
      2. TECHNICAL WORK INSTRUCTIONS
      3. Battery

      REMOVE BATTERY TRAY

      This tutorial shows how to remove the Battery Tray from the XE-1.

      1. Remove Battery Tray


      TOOLS REQUIRED

      ID Description Task
        M4 Hex Key Remove M6 Countersink Head Screws from Battery Latches

       

      1.1 Loosen and remove the M6 countersink head screws with a M4 Hex Key.

      WI0060_1.1

      1.2 Remove the Battery Latches. The Set Screws can remain in place if the Battery Latches are to be re-used.

      WI0060_1.2

      1.3 Remove the Battery Tray. The Connector Assembly Plug can fit through the matching shape in the battery tray slot to release the Battery Tray.

      WI0060_1.3

      INFO

      INFORMATION: The cable with Connector Assembly Plug is permanently attached to the Motor and is not removed in this step.

       

      1.4 The Stirrup can now be removed from the Frame if required.

      WI0060_1.4