Chain Drive
      Back to home
      1. Help Desk
      2. TECHNICAL WORK INSTRUCTIONS
      3. Chain Drive

      REMOVE CHAIN

      This tutorial shows how to remove the Chain from the XE-1.

      1.  Remove Chain.

      TOOLS REQUIRED

      ID Description Task
       

      M5 Hex Key

      Loosen M6 Cap Screws

       

      1.1 Loosen the two M6 Cap screws securing the Chain Tensioner Bracket with Pulley (jockey wheel).

      WI0078_1.1

      INFO INFORMATION: For the purpose of removing the Chain, only loosen the screws by one or two turns sufficient to release Chain tension.


      1.2 Push the Chain Tensioner Assembly upwards clear from the Chain.

      WI0078_1.2

      1.3 Remove the Chain.

      WI0078_1.3

      INFO INFORMATION: The Chain is easily removed by derailing it from the Chainring by slowly rotating the Chainring gear while pushing the Chain to the side