Steering Assembly
      Back to home
      1. Help Desk
      2. TECHNICAL WORK INSTRUCTIONS
      3. Steering Assembly

      REMOVE HANDLEBAR & STEM ASSEMBLY

      This tutorial shows how remove the Handlebar and the Stem from the Steering Fork Assembly of the XE-1.

      TOOLS REQUIRED

      ID Description Task
        M4 Hex Key M5 Cap Screws – Handlebar Stem

       

      1. Work Instruction - Remove Handlebar & Stem Assembly
      1.1 Loosen both Stem screws (M5 Aluminium) sufficiently for the Handlebar Stem to slide freely on the steering tube with a M4 Hex Key.

      WI0049_1.1

      1.2 Remove the Handlebar & Stem assembly by sliding the assembly upwards.

      WI0049_1.2

      CAUTION

      CAUTION: Take care not to let the Stem slide down the Steering Tube to avoid the risk of the Stem scratching the coating on the Steering Tube.