- Help Desk
- TECHNICAL WORK INSTRUCTIONS
- Propeller Drive & Rear Foil
REMOVE PROPELLER DRIVE SHAFT ASSEMBLY
This tutorial shows how to remove the propeller drive shaft assembly from the XE-1.
1. Remove Propeller Drive Shaft Assembly
TOOLS REQUIRED
|
ID |
Description |
Task |
|
40 mm Open Wrench |
Loosen Propeller Drive Shaft Hub |
1.1 To remove the Propeller Drive Shaft Assembly, loosen the Propeller Hub by rotating it clockwise. Pull the Propeller Drive Shaft forward to disengage it from the Gearbox Output Shaft. [Tools: 40 mm Open Wrench]
