Front Tiller Assembly
      Back to home
      1. Help Desk
      2. TECHNICAL WORK INSTRUCTIONS
      3. Front Tiller Assembly

      REMOVE FRONT TILLER ASSEMBLY

      This tutorial shows how to remove the front tiller assembly from the XE-1

      TOOLS REQUIRED

      ID Description Task
        Hex Key 5mm Remove M8 Countersink Head Screw


      1. Work Instruction - Remove Front Tiller Assembly from Steering Fork Leg

      1.1 Remove M8 Stainless Steel Screw (countersink head) and nylon washer and separate the front tiller assembly from the steering fork leg using a 5mm Hex Key.

      WI0043_1.1

      1.2 Capture the nut on the Left-Hand side of the assembly to ensure that it is not lost.

      WI0043_1.2