- Help Desk
- TECHNICAL WORK INSTRUCTIONS
- Chain Drive
REMOVE PEDAL CRANK ARMS
This tutorial shows how to remove the Pedal Crank Arms from the XE-1
1. Remove Pedal Crank Arms LH and RH
TOOLS REQUIRED
| ID | Description | Task |
| Hex Key 8 mm | Remove Crank Bolts | |
| JP00025 | Park Tool Crank Extractor - CCP44 | Removing pedal cranks from motor spindle |
1.1 Remove Left-Hand Crank Arm 15mm ISIS Crank Bolt with a 8mm Hex Key.
1.2 Remove Left-Hand Crank Arm with the Crank Extractor.
|
|
INFORMATION: Rotate the Crank Bolt anti-clockwise (right-hand thread) to loosen. Take note of the LH or RH markings on the outside face near the pedal end of the Crank Arms. |
1.3 Remove Right-Hand (RH) Crank Arm15mm ISIS Crank Bolt with a 8mm Hex Key.
1.4 Remove Right-Hand (RH) Crank Arm with the Crank Extractor.
